Do you know what you should use to cut asphalt, ceramics, diamonds, glass, semiconductor materials, stones, and the like? You can use many tools, but you should know the most efficient tool out there. Accordingly, different types of diamond blades can do the job of cutting these things for you. And if you choose the right blade, it could be both efficient and cost-effective for your project or business. If you want to maximise the blades you will be purchasing, you have to read the below basics and the dos and don’ts in using such blades.
Where Will You Use the Blade?
One of the first factors you need to consider before choosing the diamond blades to purchase is where you will use it. Correct identification would let you determine the specifications of the blade you will buy so that you can use the blade to a maximum. The materials that need cutting should match as close as possible to the blade you will use.
Although diamond blades are strong and durable, using the right blades would still make the job faster. Most companies that sell these blades will specify where it is best to use the product. If unsure, you could consult an expert and give more details on where you will use the blade.
Just be sure that you follow the manufacturer’s instructions on what material the blade can cut to avoid injuries or damages.
Dry or Wet Cutting
You also have to determine if you will be cutting with or without water. Usually, you can also use most diamond blades designed for dry cutting for wet cutting. However, this does not apply to blades that are manufactured specifically with the use of water.
You should also know that for dry cutting, the cut is usually shallow. The depth is around one to two inches. You will then have to use step cutting when you do dry cutting if you want a deeper cut.
More on wet cutting, water is necessary to prevent the excessive buildup of heat. Continuous water flow is essential because when you use a wet blade when there is no water, it will get damaged and could even injure you.
What to Do Before Cutting
Before you start cutting, you have to be sure about many things. Diamond blades get used under intense pressure, so you must check the blade before you use it. Make sure that there are no cracks, damages, excess wear and tear, or missing parts.
You should ensure that the blades are in the right place on a diameter blade shaft. To secure the placement, you should hand-tighten it with a wrench.
Next, you should check if the saw where the blades are attached has the proper operating conditions. Check the fluids, the blade shaft bearings, V-belts and pulleys, and the blade guard. All should be in place before starting the cutting job.
Lastly, the person operating the blades and the saw should wear the proper safety attire. The attire includes safety glasses, safety shoes, hearing protection, and a safety helmet.
Never start a job without checking and using these things. Diamond blades are very powerful tools, so it could either make your job easier or ruin the whole thing. You should also never force the blade to the material because you should allow the tool to do the job at its speed. There are other things to understand when using these blades, and you should also do more research regarding this matter.
